Amphenol C2LINX Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 43

Amphenol C2LINX Series Скачать руководство пользователя страница 2

2

C2LINX

Amphenol Network Solutions

All rights reserved. 04.13.20 150717 A0

509.926.6000

— amphenol-ns.com

®

Installation Guide, Part Number 150717

Copyright 2019, Amphenol Network Solutions, All Rights Reserved.

Amphenol Network Solutions
22425 East Appleway Ave. # 11
Liberty Lake, WA 99019

Amphenol Network Solutions assumes no liability from the application or use of these products. Neither does
Amphenol Network Solutions convey any license under its patent rights nor the patent rights of others. This
document and the products described herein are subject to change without notice.

About

Amphenol Network Solutions is a global innovative original equipment manufacturer that serves the data and
communications markets. We design, manufacture, and distribute products for customers who need an end to
end solution for network connectivity, fiber, power distribution, and rack management. We collaborate with our
customers to deliver product solutions that exceed expectations with innovative designs and world class quality.
Amphenol Network Solutions is the industry thought leader on network cable management.

Technical Support

Email: [email protected]
Phone: 509.926.6000

«
1
2
3
4
...
»

Содержание C2LINX Series












































Отзывы:

Нет отзывов