GND
+ AUDIO OUT
- AUDIO OUT
NO
COM
DRY CONTACT BALANCED OUTPUT
INPUT
DC INPUT
LINE LEVEL MIC LEVEL
RJ45 PIN CONFIGURATION
1)
NO
2)
COM
3)
NC
4)
GND
5) +24V 6) - AUDIO 7) GND 8) +AUDIO
Parts Identifications
1
2
8
4
1. GOOSENECK MICROPHONE CONNECTOR
XLR jack for gooseneck mic ; plug the cardioid condenser gooseneck mic to this jack.
2. TALK SWITCH ( for PM1030 ONLY - NOT AVAILABLE IN PM1010 )
This momentary direct talk switch activates the mic without pre-announcement chime.
3. CHIME AND TALK SWITCH (PM1030) / TALK SWITCH (PM1010)
A 4 tone chime shall be broadcasted when the switch is pressed once and a downward 4 tone chime follows when the
unit is switched off ( PM1030 only ). For PM1010, there is no chime output and once ON, the mic shall be activated
immediately.
6. AUDIO OUTPUT
Output is balanced with either line or mic level which can be selected from this switch ( item 7 )
4. CHIME & VOLUME CONTROLS (PM1030)
Individual control for chime and mic output level to suit the installation environment. For PM1010, only mic volume
control is available.
7. MIC / LINE SWITCH
Output level from the unit can be preselected with either mic or line level.
6
PAGE 2
PM1000 SERIES PAGING MICROPHONE
CHIME + TALK
PAGING MICROPHONE
PM1030
amperes
PRESS TO TALK
3
5
7
9
Top View
Side View
AMPERES ELECTRONICS
Quality Product From
Rear View
External Box
5. DRY CONTACT (PM1030 ONLY)
When mic is active, a dry contact is available and is useful for various applications, such as to trigger emergency ALL
CALL.
8. RJ45 PORT
To connect PM1030 / PM1010 to External Box. Power and audio output shall be linked with RJ45 cable through this
port.
9. EXTERNAL BOX POWER INPUT
The unit operates using 24V DC supply. A power adaptor is provided in the package.
