PAGE 14
amperes electronics
Operating the Unit
-
A successful paging can only be achieve if TD6240 is connected, without it would be incomplete installation. Initial
setup such as priority level should be set.
PD2400 can be linked to TD6240 for zone decoding, or used in MatriMix system for matrix installations.
Follow the simple steps below to begin paging
1. DIRECT ZONE PAGING
Direct zone paging is when
the user select the required
zone and press CHIME +
TALK button.
A chime shall be broadcasted
followed by illuminated ring
at the gooseneck mic.
To end paging, simply press
the CHIME + TALK button
again which would be
followed by a downward
chime.
Example :
Performing a paging to
zone 1 and 15.
Press button “1”
Press button “ADD”
Press button “1” and “5”
Press “CHIME + TALK”
Talk when the LED ring at the mic
is lit and to end,
press “CHIME + TALK”
2. ALL CALL PAGING
To maka an ALL CALL
paging, simple press the
“ALL CALL” button, without
having to press “CHIME +
TALK ” button.
Paging mic is ready for
announcement once the LED
ring is lit.
To end paging, simply press
the “ALL CALL” button again.
In ALL CALL paging, all
normal zones shall be
activated. This is however,
would not energise 24V DC
overriding supply to override
volume controllers. To enable
overriding, we recommend
the usage of EP1200.
Example :
Making call to all normal
zones ( not overriding
external volume control-
lers ).
Press “ALL CALL”
Talk when the LED ring at the mic
is lit and to end,
press “ALL CALL”
