PAGE 6
MA2000 SERIES | MIXER AMPLIFIER WITH 3 ZONE OUTPUT
Connecting BGM Sources
Use the right connector for the appropriate
BGM source. At any one time, only one jack
shall be connected to the inputs of the
same channel to avoid interference. Also,
please switch to the right input level
position for the correspondence input
source.
Very often BGM source shall have stereo
outputs whereas the mixer amp has only
mono input. Therefore, use either one
output of the BGM source to connect to the
input. To obtain better result of music
stereo effect, use a combiner jack (stereo
to mono) before inserting to the mixer
amplifier.
Switch to the appropriate
input level attenuator. ie.
LINE for BGM source.
RCA JACK
STEREO PHONE JACK
Balanced input source
(Line / Mic level)
MIC
LINE
LINE
PHANTOM POWER SWITCH
Switch on when condenser microphone is used. In normal
usage, it is recommended that it is switched off
Two channels - 1 and 2 are provided with
switchable phantom power of 12V.
MIC
LINE
MIC
LINE
MIC
LINE
MIC
LINE
O N
Phantom Power