PAGE 6
iPX5151 | ETHERNET PAGING CLIENT
Update Firmware
1. Press & hold the reset button until “ STREAMING ” LED is turned ON. This will set the IP address to default address
192.168.0.100.
2. Open a browser and enter the IP address 192.168.0.100. A web page as shown below shall appear.
3. Select “ Upload Firmware ”, choose a binary file with “ .acfr ” extension and click “UPLOAD”
4. Once the uploading is completed, the browser shall enter the login page.
Update firmware in Bootloader Mode
If the iPX5151 “hanged”, it is required to perform system reset by :
Click the Upload Firmware button to find the
updated firmware file.
Find the updated firmware file.
Ready to upload, click Upload
button to upload the firmware.
Updating progress
After finish updating firmware, the browser automatically
restart.
System firmware shall be updated once in a while when new features are available or to fix bugs. There are 2 methods of doing;
1. Open a browser and type in the iPX5151 IP Address.
2. Under “System” page look for “Update Firmware” section as shown in below.
Update firmware in Normal Operation Mode
Click “ SELECT FIRMWARE” and choose a binary file with “.acfr” extension. Click
“UPLOAD”.
Once the update is completed, the browser should enter the login page.
IPX5151
IPX5151
2.06
iPX5151.acfr
IPX5151.acfr
IPX5151.acfr
