Ampac ZoneSense Plus, Установка и пусконаладка

Страница: 4 / 28

Installation & Commissioning of Control & Monitoring Add On’s
Page: 2
1 About This Manual
1.1 Purpose
This manual is an instructional tool for the installation and commissioning, of add on ancillary
cards, modules and boards that can be fitted to the
ZoneSense PLUS
Fire Alarm Control Panel
(FACP) and should be read in conjunction with the main Installation and Commissioning Manual.
1.2 Scope
The information within this manual is only available to and for the use of personnel engaged in
the installation and operation of the
ZoneSense PLUS
FACP.
ZoneSense PLUS
has been designed to comply with major world standards. To ensure these
standards are not compromised in any way installation staff and operators should;
1.
be qualified and trained for the task/s they undertake;
2.
be aware this manual should be read prior to the installation and commissioning of the
ZoneSense PLUS
FACP;
3.
observe anti-static pre-cautions at all times; and
4.
if a problem is encountered or there is any doubt with respect to the operational parameters
of the installation the supplier should be contacted.
1.3 References
ZoneSense PLUS
Technical Manual
ZoneSense PLUS
Operation & Programming Manual
ZoneSense PLUS
Installation and Commissioning Manual
Apollo Detector / Device Manuals
Ampac Product Data Sheets
British Standard EN54 Parts 2 & 4
European Standard BS 5839
FIRE
ZONE 1
Z ONE 2
ZONE 3
ZONE 4
ZONE 5
Z ONE 6
ZONE 7
ZONE 8
FAULT / DISABLED/TEST
CA NCEL
M E N U
I EN TER
SY STEM STATUS
PO WE R
POWER FAULT
SYSTEM FAULT
EARTH FAULT FAULT OUPUT
FAULT/DISABLED
ANCILLARY OUTPUT
DI SABLED
ALARMS/FAULT
DISABLED
TEST
AMPAC
SYSTEM IS NORMAL
ALARMS DELAY FIRE
FAULT
FI RE OUTPUT ON FI RE PUTPUT
FAULT/ DISABLED
DI SABLED
NORMAL ENABLE
EVACUATE RE SET SILENCE
BUZZER
SI LENCE
RES OUND OVERRI DE
Figure 1: Examples of the ABS, Metal Cabinet and Metal Cabinet with Battery Box