18
MAN3037-2
XP95 PRODUCT GUIDE
10
XP95 Mounting Base
10.1 XP95 Mounting Bases and XPERT cards.
The XP95 smoke and heat detectors all fit the XP95 mounting base.
The base is a zero insertion force base with dual finger receptacles
of stainless steel into which the detector terminals slide. Cable
connections of up to 2.5mm diameter are made via captive cable
clamps.
There are four double terminals and one single one,
L1 line IN and OUT, double terminal
L2 line IN and OUT, double terminal
+R remote LED positive supply, double terminal
-R remote LED negative supply, double terminal
The remaining single terminal is isolated and can be used to provide continuity of an earth or shield.
Universal address cards, known as XPERT cards are supplied with all bases. Consult the coding guide to
determine which pips are to be removed. Pre-printed and pre-punched address cards that save time and
increase accuracy during commissioning are available in sets, part number: 38531-771. The base has a ‘one
way only’ fit and detectors can be locked into the base by a grub screw with the aid of a 1.5mm hexagonal
driver.
Figure 17 – Schematic Wiring Diagram – XP95 Mounting Base
Figure 18 – Schematic Wiring Diagram of XP95 Detector Circuit with a Common Remote LED
10.2 Product Codes
Product Description
Part Number
Item Number
XP95 Detector Base with Xpert Card
45681-210AMP
201-0004
XP95 Detector Base with Xpert Card (Black)
45681-361APO
201-0093
Содержание XP95
Страница 1: ...XP95 Product Guide MAN 3037 ...