2: Installation
MPEG4000-D4 Hardware Reference Manual
© 2011 Advanced Micro Peripherals
Document version A.01
2
15
Conventions
The following pages provide information about these jumpers and connectors. All
illustrations on these pages are shown in the same orientation as the photograph
above, unless otherwise stated.
The following table explains the conventions adopted when specifying jumper
settings:
Symbol
Explanation
Jumper is fitted.
Jumper is not fitted.
VID1 - Input and output for NTSC/PAL video and audio
Connector used to attach video sources to the MPEG4000-D4. Pin-out details for
the four channels A, B, C and D are shown in the following tables.
Channel 1
Pin
Signal
Pin
Signal
1
Video-In A1
2
GND
3
Reserved
4
GND
5
Video-Out 1
Note 2
6
GND
7
Audio-Out 1
8
GND
9
Audio-In 1
10
GND
Channel 2
Pin
Signal
Pin
Signal
11
Video-In A2
12
GND
13
Reserved
14
GND
15
Video-Out 2
Note 2
16
GND
17
Reserved
18
GND
19
Audio-In 2
20
GND
