2: Installation
Hardware reference manual
© 2012 Advanced Micro Peripherals
Document version A.00
3
11
PCI – Bus connector
Standard 32-bit PC/104
-Plus
bus PCI Rev 2.1 compliant, 3.3V and +5V tolerant
operation.
JP1 and JP2
16-bit PC/104 bus connectors.
These bus connectors are not currently used on the mPCI-4 card except for
routing signals to other PC/104 cards.
J1 – miniPCI Slot 1
miniPCI Type III slot
This is the first miniPCI slot behind the bridge
This is assigned bridge resource IDSEL0, PCICLK0, REQ0/GNT0
J2 – miniPCI Slot 2
miniPCI Type III slot (located on underside of board)
This is the second miniPCI slot behind the bridge
This is assigned bridge resource IDSEL1, PCICLK1, REQ1/GNT1
J3 – miniPCI Slot 3
miniPCI Type III slot
This is the third miniPCI slot behind the bridge
This is assigned bridge resource IDSEL2, PCICLK2, REQ2/GNT2
J4 – miniPCI Slot 4
miniPCI Type III slot (located on underside of board)
This is the forth miniPCI slot behind the bridge
This is assigned bridge resource IDSEL3, PCICLK3, REQ3/GNT3
