43
In order to use the scanner, operate as follows:
- select with the scanner the code which corresponds to the frame to be joined
- the machine positions itself on the selected program
- press “EXE” to execute the working cycle
D. 2 LEARNING A NEW CODE
In order to introduce a new code operate as folows:
from the Main Menù (see dwg D.2) press F2
Picture D2
Position the yellow arrows on a new empty line
push “ENTER”
read the bar code which corresponds to the frame which must be joined
execute the programming as indicated at chapter 5.4.11
In order to modify the name of a program which has been already installed, operate
as follows:
- from the Main Menù (see dwg D.2) press F2
- select the program to be renamed using the yellow arrows on the keypad
- press F1
- read the new bar code using the scanner
If the selected code does not correspond to an existing program , you will see the
following message on the dispay “B” (see picture D.1.A) “THE PROGRAM DOES NOT EXIST”;
in this case operate as indicated at chapter D.2
Содержание Mitre-Mite VN4 MemoryProgram
