Professional,
Creditable,
Successful
DMT80600T104-31WT User Guide
www.ampdisplay.com [email protected]
7
(PIC 2)
Step 3
: Choose one network from the WI-FI network list, if the network is open, the product will connect it
automatically; if the network is secured with WEP, WPA or WPA2, you must enter the password before connecting to the
network;
Step 4
: After connecting the network, the status bar will show the ICON
and the approximate signal strength
(depending on the number of strip lights);
Step 5
3.6 Ethernet
: If you want to remove the wireless networks already settled, click it, and then choose “cancel save”. The next
time you want to connect to the network, you must re-enter the password and set again.
10M/100M Ethernet is available. Before plugging the internet cable, the statuses bar shows the ICON
.
Step 1
: Plug the internet cable, the status bar will show the name of the network and the ICON
. If not, please confirm
whether the pilot lamp of the network interface is flashing. If it is not flashing, please check whether the interface cable
is securely plugged or the interface cable is qualified;
Step 2
: Click
Ethernet Manager
in the host pane;
Step 3
: Click
Configure Ethernet
under the
Configure network
. There are two options: 1.automatically assign an IP
