A C
Ch
ha
as
se
e is a play of lights, it is a sequence of steps (from 1 to 48 max).
To create/modify a program follow all steps listed below:
1) If Matrix is switched off, switch it on pressing
POWER
key.
2) Press
Chase
key to activate the
CHASE
function.
(the
Chase
led key will light up).
3) Press 1÷12 keys to select only the chase that you want to modify.
(only one chase h
hiig
gh
hlliig
gh
htte
ed
d).
For successive chase use the P
PA
AG
GE
E key
4) Press
STEPS
key to activate the
STEPS
function
5) Press one of the 1÷12 keys to select the step that we want to create/modify.
For successive steps use the P
PA
AG
GE
E key
7 Press the
EDIT
key to create/modify the selected step.
9) Modify the value of the channels through the 12 relative faders or the 1÷12 keys.
For next channels use the P
PA
AG
GE
E key
10) When the step is completed it can be stored through the
SAVE
key.
11) Now Matrix is in the next step repeat again the 9 and 10 steps.
12) When the creation of the steps has been finished press
Chase
key to
come back to the
CHASE
function.
(the
Chase
led key will light up).
13) Finally you must press the
GO
key to execute the chase.
The chase is complete; to create/modify others repeat again all the above
steps.
9.2
CREATION OF A CHASE
GB
Distribuited by:
AMLUX s.r.l.
46042 Castel Goffredo (MN)
[email protected] - www.amlux.it
