6.6
FUNCTION KEYS IN STEPS MODE
GB
In S
ST
TE
EP
P mode there are 6 ffu
un
nc
cttiio
on
n kke
eyys
s see (Pic. 2 par 4
4..1
1).
COPY
Key:
Press this key to copy the active step on a free step of the same chase: the display shows ""S
SE
EL
LE
EC
CT
T
D
DE
ES
ST
TIIN
NA
AT
TIIO
ON
N S
ST
TE
EP
P,,"" select through the 1÷12 keys the destination of the copy.
For the successive steps use P
PA
AG
GE
E key
N
No
otte
e: After have pressed C
CO
OP
PY
Y key, the same becomes G
GR
RA
AB
B key.
GRAB
Key: active only pressing
COPY
key
Press this key to store, the scene; you can then paste it in an empty scene of the same program
or in a diferent program. The key becomes P
PA
AS
ST
TE
E.
ALL
Key: active only pressing
COPY
key
Press this key to copy all the steps of the active chase to another chase: the display shows
""S
SE
EL
LE
EC
CT
T D
DE
ES
ST
TIIN
NA
AT
TIIO
ON
N C
CH
HA
AS
SE
E,,"" select through the 1÷12 keys the destination of the copy.
For the successive chase use P
PA
AG
GE
E key
PASTE
Key: active only pressing in empty step
Pressing this key the step previously stored could be pasted to an any empty step of any chase.
ERASE
Key:
Pressing this key the active step will be erased, select through the 1÷12 keys (for the successive
chases use P
PA
AG
GE
E key) the step that must be erased, then press the E
ER
RA
AS
SE
E key.
The step will erased in a permanent way, it is not possible recover it.
TIME
Key:
Press this key to change the total time of the scene, the value is in seconds from 0,2 to 600, use
the fader under the T
TIIM
ME
E writing, or the encoder. To confirm the modify press the O
OK
K key, to get
out of the function press the E
ES
SC
C key.
CROSS
Key: active only pressing
TIME
key
Press this key to modify the time of transition of the
scene, the value is express in percent from 0 to 100%,
use the fader under the C
CR
RO
OS
SS
S writing, or the encoder.
To confirm the modify press the O
OK
K key, to get out of
the function press the E
ES
SC
C key.
TO ALL
Key: active only pressing
TIME
key
Press this key to set equal values for all the step .
LAST
Key:
Press this key to select the last step of the chase, select through the 1÷12 keys (for the successi-
ve chases use P
PA
AG
GE
E key) the step where you want to terminate the chase, then press the L
LA
AS
ST
T
key.
For the successive chases use P
PA
AG
GE
E key
N
No
otte
e: The last step of the chase will be stored automatically in E
ED
DIIT
T mode.
EDIT
Key:
Press this key to create/modify the active step see par.
6.7
EDIT IN STEP mode
STEP
value
STEP
CROSS
TIME
Distribuited by:
AMLUX s.r.l.
46042 Castel Goffredo (MN)
[email protected] - www.amlux.it
