AML-3
RT
Quick Start Guide
2.
Start Sailfish and navigate to
Devices
tab
3.
Connect instrument to computer via USB-C or
MCBH connector.
● If using MCBH, select appropriate BAUD and COM port
and apply 8-30 VDC to flying leads
● Default BAUD is 9600
4.
Sailfish will detect the instrument and a tile will
appear
● If a tile does not appear, select the refresh button
5.
Select corresponding tile and press “Connect”
Connect via Sailfish
Sailfish provides a user-friendly means of
streaming data, configuring an instrument, and
updating firmware
● Remove the USB-C cap in dry environment only. Do not deploy instrument
without the waterproof cap fully installed.
● Instrument requires a USB 3.0+ compatible port. If USB-C connection
difficulties are encountered use a different port or an adapter.
Available
connection type
MCBH Only:
Serial settings
1.
Install Sailfish on a Windows PC from either:
● AMLoceanographic.com
● USB thumb drive
6.
Click the gear icon to access instrument settings
● Instrument settings allow taring of the pressure sensor.
Instrument settings
Live pressure measurement