AML Oceanographic AML-1 RT, Руководство пользователя

Страница: 5 / 18

70mA at 8V, 20mA at 30V
1
Temperature
Operation
Storage -20 to +45°C
-20 to +60°C
Dimensions
Diameter
Length
Weight
Weight in water
3.3 cm / 1.3 in
10.74 cm / 4.23 in (no sensor installed),
20.01cm / 7.88 in (SV•X2change
TM sensor installed)
0.2 kg / 0.4 lb (no sensor installed)
0.11 kg / 0.25 lb (no sensor installed)
1 - Typical power draw when an SV sensor is installed. Other sensors may draw a different power.
1.2 Connectors and Cables
The AML-1 RT has only one connector, a 6-pin female (MCBH6F), located on the face opposite
the sensor port. This connector is used to provide external power and serial communication
during deployment. The instrument is factory set to either RS-232 or RS-485. The pin diagram
for the connector is shown in Figure 1 below. Accompanying cables of various lengths are
available with the AML-1 RT. Contact AML for details.
Pin RS-232 RS-485
1 Rx - Signal Tx - Signal B
2 Ground Ground
3 Power (8-30 V) Power (8-30 V)
4 Tx – Signal Tx - Signal A
5 N/C N/C
6 N/C N/C
Figure 1: Left: Table of pin numbers and purposes. Right: Drawing of 6-pin female connector
AML Oceanographic Ltd. 5/18