©Copyright Amkus Rescue Systems, Inc. 2016-2017
LAI-001 August 31, 2017 Rev01
13
6.4 SPREADING / SQUEEZING / LIFTING
Figure 6.4a
The spreader can be used for spreading, squeezing, pulling and lifting operations. When spreading, squeezing or lifting, make sure
that the spreader tips are positioned to maintain maximum contact with the surfaces to be spread or gripped. Always stabilize the
object being lifted. When operating the spreader, the tool may rotate as it meets resistance. If tool rotation places the user or others in
jeopardy, immediately release the control valve actuator and modify your procedure. The deadman safety feature should immediately
return the control valve actuator to the center (neutral) position, and the movement of the arms will stop. Then seek another purchase
point that does not cause the same problem.
CORRECT
STARTING POSITION
INCORRECT
STARTING POSITION
INCORRECT
STARTING POSITION
Figure 6.4b
See 7.2 for exchanging spreader tips
