background image

©Copyright AMKUS Rescue Systems, Inc. 2010 - 2019 

LAS-002 August 19, 2019 Rev03

4

1.0 MEANING OF SAFETY SIGNAL WORDS

A safety related message is identifi ed by a safety alert symbol and a signal word to indicate the level of risk involved with a particular 
hazard. Per ANSI standard Z535.6-2011, the defi nitions of the four signal words are as follows:

DANGER

DANGER  indicates  a  hazardous  situation  which,  if  not  avoided,  will  result  in  death  or  serious 
injury.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious 
injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, could result in minor 
or moderate injury.

NOTICE

NOTICE is used to address practices not related to physical injury.

2.0 SPECIFICATIONS

Part # AMK-30CRT

MECHANICAL SPECIFICATIONS

Length 30.1 in. (765 mm)

Width 12.0 in. (305 mm)

Depth 8.2 in. (208 mm)

Weight (ready to use)

(Ready-to-use with Standard couplings)

48.0 lbs.  (21.75 kg)

Weight (ready to use)

(Ready-to-use with Mono couplings)

48.5 lbs.  (22.0 kg)

Maximum Spreader Opening 32.0 in.  (813 mm)

Rated Input Pressure 10,500 psi  (724 bar)

Fluid Type AMKUS MV-1 Mineral Based Hydraulic Fluid

(for equipment stored and operated in environments below 
freezing, use AMKUS MV-0 Mineral Based Hydraulic Fluid)

Safety Data Sheet (SDS) for AMKUS MV1 Hydraulic Fluid is available 
at AMKUS.com and CHEMTREC.com

3.0 PROTECTIVE CLOTHING

It is the responsibility of the user to insure that appropriate protective clothing and equipment are used to provide protection from 
those hazards to which personnel are exposed or could be exposed while working with this product.

4.0 TRAINING

This product is designed to be used by emergency services personnel to facilitate the extrication of victims from entrapment. Its use 
should be limited to trained personnel only. All personnel using this equipment are assumed to have completed a course of instruction 
that  is  acknowledged  as  being  educationally  sound  by  the  local  authority  having  jurisdiction  over  such  training.  This  document 
contains basic operating and maintenance instructions only and is not intended to provide policy or methodology for use.

Содержание AMK-30CRT Series













Отзывы: