-2-
-3-
Getting Started
Illustration
Fig. 1 Front view of Keyboard
Fig. 2 Back view of Keyboard
Setting Up
1. Start by inserting the batteries in the Keyboard.
2. Next plug the USB Adapter in to a free USB port.
Pairing Up
Pairing the Touchpad Keyboard to the USB Adapter is a very simple
process.
The device comes pre-paired
but in case it is not working,
follow the below pairing process.
1.
Press the Connect button on the USB Adaptor. A light will start
blinking. This light will blink for approximately 10 seconds within which
the next step should be performed.
2.
Press the connect button on the back of the Keyboard.
3.
The light on the USB Adaptor should stop blinking which shows that
pairing between keyboard and receiver has been successful.
Note: In case the pairing procedure did not work, repeat the procedure using a different USB port on your
computer. You can also try restarting your computer with the USB RF Receiver plugged in. If you are
still unsuccessful please contact Technical Support @ +91-9312691448.
Home: Open your
home page
Search: Opens the
web search function.
Connect Button
Battery
Compartment
USB Reciever
Play/Pause
the media player
Low power
indicator
Favourite: Opens the
bookmarks folder
Email: Opens the
Default email client
Volume
+
: Increase
the volume
Volume
--
: Decreases
the volume
Stop: Stops
the media player.
Your Multitouch Keyboard is now
READY TO USE
