Amity Technology 3200, Руководство по эксплуатации

Страница: 66 / 77

13 - 2
13.3 Tools
Amity has the following tools available:
Trantorque sockets
(#59107, #59108, #64820)
Trantorque wrench (#64320)
13.4 PTO Driveshaft Friction Clutch Setting
To set the friction clutch to the correct setting after rebuilding simple torque the clutch plate down
evenly in a star pattern until the spacer collar is just able to move, but not loose. The collar holds a
set distance which sets the clutch level. There are no torque spec for the bolts.
13.5 Easy Lock Assembly and Removal
Removal:
1. Remove the EASY LOCK
®
tab with a screwdriver Figure 13 - 2.
2. If the guard is chained, remove or hold back the chain to prevent it from blocking the bearing.
3. Turn the bearing in the direction as indicated in Figure 13 - 3. Then, slide guard off the bearing.
Assembly:
1. Align the bearing tabs with the guard bell slots.
2. Slide the bell onto the bearing.
3. Turn the bearing to lock it in place.
4. Snap the EASY LOCK tab into the bell.
Figure 13 - 3: Turn Bearing Figure 13 - 2: Remove Tab