AIPQB1215WA61/01
aipqb1215wa6101_g_en_101
26/36
2 x M4
Fig. 18 -
Location of M4 screws on the unit’s cover
Turn TFT panel around and place it on the table with display facing downwards
and mounting console facing upwards.
Loosen and remove 4 M4 screws on cover sides.
2 x M4
2 x M4
Fig. 19 -
Location of M4 screws on the unit’s cover
Internal part of TFT panel is connected to the cover with yellow-green PE
protective conductor.
Disconnect faston connector on the yellow-green PE
protective conductor.
Remove the internal part of the TFT panel from the cover and place it on the
table with display facing upwards.
Warning! The table must be flat, free of
impurities, and covered with protective film, otherwise the display can be
damaged.
