Amish Country Gazebos Wood Gazebo-in-a-Box, Руководство по сборке

Страница: 24 / 28

1.
Install the 7 large screen panels. You will need to tilt the
screen slightly and slide the top in first, between the rafters
and against the post. Then slide the bottom in against the
post and center it in the opening.
2.
Attach the 8 retainer strips on the inside center of each post.
On each side of the door, use the single dado retainer. Use
the double dado retainers on the other posts. Fasten with
5 – 2” screws through the pre-drilled holes.
3.
Install the door frame. Attach the upright angled pieces first,
centered on the posts. Then the full 1
3
/
8
” x 2 ½” uprights
directly on the angled strips. Fasten these with the 2 ½”
screws through the pre-drilled holes. Likewise attach the
horizontal 1
3
/
8
” x 2 ½” board to the bottom of header board,
making sure they line up with each other on the outside.
4.
Attach the ¾” x 6 ½” board above the door on the outside.
Simply push it up against the plywood and fasten with 3 – 2”
screws through the pre-drilled holes.
5.
Install the door. Directions for door assembly are included in
the door hardware kit.
Note:
Do not install the braces in the door-
way. If you have already installed your gazebo
with these braces, you can still remove them by
backing out all the screws except the 2 at the
top of the post and swinging this section out.
15
Step 15. Installing the screen
package
(optional)
20
Note:
See bottom of page