Important Safety Instructions
Installation
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Clean only with a dry cloth.
•
Once removed from the transit packaging, the apparatus must
be handled with care and must not be dropped, shaken or
exposed to any physical shock.
•
Disconnect the apparatus from the mains before you start any
installation procedures.
•
The apparatus is designed to be placed horizontally on a hard
flat surface.
•
Do not place the apparatus where it may be subject to physical
shock or vibration or where the product may drop, topple, slide
or shake as this may cause personal injury or irreparable damage
to the product, which will not be covered by the manufacturer’s
warranty.
•
Do not stand the apparatus on a soft surface such as carpets or
soft furnishings etc as these surfaces will obstruct airflow, may
cause the product to overheat and will invalidate the warranty.
•
Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
•
Do not install the apparatus into any built-in installation such
as bookcase or rack without ensuring that a minimum of 100mm
(4”) of clear space is available at the front, rear, sides and top of
the product.
•
Do not install the apparatus near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that
produce heat, or where it may be exposed to direct sunlight.
•
Do not cover the apparatus.
•
Do not stack electronic equipment on the top of the apparatus
or place on top of any surface that may become warm in use
(such as an AV amplifier)
•
“WARNING” - “To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture”.
•
Do not use this apparatus near water.
•
Do not expose the apparatus to dripping or splashing; no objects
filled with liquids such as vases should be placed on the apparatus.
•
Do not pick or move the apparatus whilst it is operating. If the
product must be moved, please unplug the lead from the wall
socket and wait 30 seconds before moving the product.
•
The apparatus is not suitable for outdoor use. The leads and
power-supply cord must be routed where they cannot be walked
on, chafed, tripped over or pinched by items being placed
on or against them. Power-supply cords must not be routed
underneath carpets or rugs where any damage could not be seen.
•
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
•
Operate the apparatus only from the type of power supply supplied
by the manufacturer and as indicated on the marking label. The
mains lead is fitted with a plug that is designed for use with the
power source of the country of installation. If you are not sure of the
power supplied to your home, consult your local power company.
•
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
•
Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
•
Only use attachments and accessories specified by the manufacturer.
•
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
•
No Naked flame sources, such as light candles, should be placed
on the apparatus.
•
Disconnect the apparatus from the wall outlet before cleaning.
Operation
The apparatus and power supply will get warm to the touch when in
use. If the apparatus, power supply or attachments become hot to the
touch, immediately unplug the apparatus from the mains electricity
supply and call your service provider to arrange replacement.
Lightning Protection and Not in Use
If lightning is expected, or the product is not going to be used for
a long period of time, please unplug the mains lead from the wall
outlet, unplug the digital TV network connection from the rear of
the product and unplug the video and RF leads to the television.
Use with Plasma Displays
When used with certain display types, such as plasma displays,
it is important that the picture is not paused for a long time
(greater than 5 minutes) as the image displayed may then be
‘burned’ permanently into the screen of the display device. This
display device. Amino Communications Ltd. will not be held liable
for damage so caused.
Содержание A-129
Страница 1: ...A129 User Guide 511 973 00 04...
