Plastering and decorating continued...
20
Apply joint tape
Apply professional plasterboard joint scrim
(Amina recommend use of a self adhesive
fibreglass scrim tape) over the joint between
the speaker and the surrounding wall.
03
Plastering
Use standard finishing plaster for large areas.
For patch plastering use a repair plaster such
as British Gypsum Easi-fill®
Please refer to the appropriate page in
Section B (alignment and plastering
preparation). Pages 13 - 17
Important: To ensure proper operation and
sonic performance, no more than 2mm
(5/64”) of plaster must be applied to the
surface of the panel.
The working environment must be dry
enough to allow the plaster finish coat to dry
within hours, not days.
Note:
Amina have separate guides for information
about installing the product behind other
materials and surfaces such as wooden
panels, acrylic and melamine laminates.
Contact Amina if you require any of this
additional information (page 28)
04
Decorating
Allow your plasterwork to dry completely.
Test the speaker again (see Section C, page
18). You can then paint the surface or hang
wallpaper in the usual manner.
Evolution Series speakers have been
optimised for up to 3 coats of emulsion once
plastered. Additional coats will cause very
small reductions in the maximum sound
pressure levels achievable.
05
03
05
