04
rendered wall
render yet to
be applied
03
Solid wall installation with backbox
continued...
1 1
Install backbox
Make a small hole in one of the rubber
grommets and pull the speaker cable
through it and into the backbox. There are
four slots in the base of the backbox and
using suitable screws (not supplied), fix the
backbox to the brickwork within the cavity.
Ensure the front edge of the backbox aligns
flush with the front face of the surface which
will have the final 2mm skim coat of
plaster applied.
We recommend shims are fitted behind the
backbox to achieve a level solid fixing. It is
recommended to add expanding foam
around the sides and rear to prevent
resonance and also to add mineral wool
(max 1”) to the inside of the Backbox.
NB: If there is a layer of render to be applied
or already applied to the brickwork, be sure
to align the front edge of the backbox to the
front edge of the render
03
Connect speaker
Connect the speaker cable to the speaker
using a high quality crimping tool.
Your Evolution Series speaker is fitted with
blue butt splice crimp connectors which are
suitable for speaker cable thicknesses of
1.5mm
2
- 2.5mm
2
(16 - 14AWG). This type of
connector ensures a permanent connection
is created inside your wall cavity.
04
Expanding foam
Shim
Mineral Wool
3
