Plastering and decorating continued...
03
04
05
Apply joint tape
Apply professional plasterboard joint scrim
(Amina recommend use of a self adhesive
fibreglass scrim tape) over the joint
between the speaker and the surrounding
wall.
Plastering
Apply a second coat of PVA immediately
before plastering. Use standard finishing
plaster for large areas. For patch
plastering use a low shrinkage repair
plaster such as British Gypsum Easi-fill®
Please refer to the appropriate page
in Section B (alignment and plastering
preparation for your specific installation
type). Pages 13 - 17
Important: To ensure proper operation and
sonic performance, no more than 2mm
(5/64”) of plaster must be applied to the
surface of the panel.
Decorating
Allow your plasterwork to dry completely.
Test the speaker again (see Section C,
page 18). You can then paint the surface or
hang wallpaper in the usual manner.
Evolution Series speakers have been
optimised for three coats of emulsion once
plastered. Additional coats will cause very
small reductions in the maximum sound
pressure levels achievable.
D
Note:
Amina have separate guides for
information about installing the
product behind other materials and
surfaces such as wooden panels,
acrylic and melamine laminates.
Contact Amina if you require any
additional information (page 29)
03
05
20
