Plastering and decorating
01
02
Apply PVA
Using a brush or foam roller, apply a thin
coat of PVA (wood glue) to the entire
speaker panel surface, this will assure
proper adhesion between the panel
surface and the plaster coating.
Important: Amina recommends you leave
the PVA to dry for at least several hours,
this will ensure the panel surface and
surrounding areas are totally dry, sealed
and ready for plastering.
.
Fill gap between speaker and surrounding
area
It is important to ensure that plaster is
pushed into the 2mm (5/64”) gap that
surrounds the speaker. This will create
a strong bond between the edge of the
speaker and the edge of the wall.
This further helps to prevent any cracks
appearing in the skim finish.
IMPORTANT: There MUST be a gap of 2mm
(5/64”) all the way around the speaker
edge. If there isn’t simply remove the
speaker and increase the aperture size
accordingly (plasterboard installations
only)
If you are using a solid wall backbox,
ensure there is an even gap between
the speaker and the inside edge of the
backboxSW.
D
Finishing
01
02
19
