AMIMON HD SkyLink Falcon, Руководство пользователя

Страница: 26 / 28

HD SkyLink
Manual AMIMON HD SkyLink
page | 26
www.globe-flight.de
Frequently asked questions
Failure of the binding process

Make sure both transmitter and receiver are powered on.

Make sure that pairing units are the only Amimon devices currently powered on.

Bring the transmitter and receiver closer together but with a minimal distance of 1
meter.

Make sure that there are no obstacles in the line of sight between the transmitter and the receiver.
No signal on Monitor

Make sure that the receiver and the monitor are powered up.

Check the cable connection between receiver and monitor.

Make sure that the monitor is set to display video from the right source (HD-SDI1, HD-SDI2 etc.).

Power cycle the receiver.

Unplug the connection cable from both devices und plug it back in.

Replace the HD-SDI cable.
No video over the established wireless connection

Make sure the transmitter is properly connected to the source.

Make sure the source is powered on.

Unplug and then re-plug the transmitter to the source.
Abnormal color or noise on the monitor

Unplug and then re-plug the HD-SDI cable between the receiver and the monitor.

Unplug and then re-plug the HDMI or HD-SDI cable between the transmitter and the source.

Bring the transmitter and receiver closer together but with a minimal distance of 1
meter.

Make sure that there are no obstacles in the line of sight between the transmitter and the receiver.

Power cycle the system.
No Audio

Check the mute and audio volume settings on the monitor.

Check whether the audio format setting on the source is compatible with system. If necessary,
change the output format of the source to PCM 2.0, DTS or Dolby Digital.
Infrared remote control malfunctions

Make sure that the plastic cover of the battery was removed.

Make sure that the remote control battery is full.

Make sure that the IR receiver is connected to the HD SkyLink Falcon receiver.

Make sure there is enough distance between the IR receiver and any fluorescent light sources or
radiation which could interfere with the IR signals.