18
Installing the Units|Connecting Components to Drone
Doc P/N: 9040962 | Rev 06 | Printed 17 August 2017
Navigation pane
2. Place the antenna on the rear side of the drone mounting plate.
3. Fasten the antenna base to the drone with four screws (1) using
washers (2) and nuts (3).
B-
Connecting Antenna to HD Transmitter
1. Route the antenna cables from the base of the antenna holder to
the HD transmitter (3).
2. Connect the two
(1) to the coax sockets
(2).
3. Secure the antenna cables.
3
1
2
Tip:
The antenna can be connected to the drone using zip ties instead of
screws.
1
2
3
Note:
Be sure the antenna cable loop is maintained. The cable’s minimum
bend radius is 5mm.
CONNEX ProSight Installation and Operation Guide
