amig AMIG-LST Series, Быстрая инструкция

Страница: 25 / 37

22
Important! If the selected program location already has a job stored in it, then this existing job will be replaced by the new
job.
5.“PrG” appears on the left display to indicate that the job is now stored. Release the Store button (5)
6. Briefly press the Store button (5) to exit from the job menu
Recall a job
After storage, all jobs can be recalled and used in job mode.
1.With the “C” button (4), indicator (22) is on -the last job used is displayed. To view settings programmed in this job, use
the “Parameter selection” buttons (2) and (3). The process and operating mode of the stored job are also displayed.
2.With the adjustment knob (1), select the desired job.
3.Press the “CALL” button (4), indicator (22) is off. Exit from the recall mode.