①
Switch on the WIFI of the portable power device
②
Plug in the cable from the router
1.Connect to WIFI with a Cable:
WIFI part------introduction
③
Turn on the WIFI of the cellphone and connect to wifi_xxxxxx (6 random numbers )
√
Connection is completed and the Internet is accessable. No setting is needed as default. If the setting is changed, enter the Internet setting in
the WIFI navigation page, select Dynamic Acquisition as the WAN connection mode.
①
Switch on the WIFI of the portable power device
②
Plug in the cable from the router
③
Open the cellphone's browser; input 192.168.10.1 and click OK to enter the navigation of WIFI setting (When the first time you login, please use
admin as the username and password)
④
In the navigation page click the wireless security; select WAP2-PSK as the security mode; select TKIP as the WAP algorithm; input your password;
2.Add/Change an Account:
④
In the navigation page, click the wireless security; select WAP2-PSK as the security mode; select TKIP as the WAP algorithm; input your password;
click OK
√
Password setting is completed.This device's WIFI will be disconnected. Customer need to login again with the new user name and password.
4
①
Switch on the WIFI of the portable power device
3.Bridging WIFI Setting:
①
p
p
②
Turn on the WIFI of the cellphone and connect to wifi_xxxxxx (6 random numbers )
③
Open the cellphone's browser; input 192.168.10.1 and click OK to enter the navigation of WIFI setting (When the first time you login, please use
admin as the username and password)
④
In the WIFI navigation setting page, click wireless relay; click OK in the pop-up dialogue box; select AP Client, click OK; Click Searching IP;
input the password and click OK
√
The Bridging setting is completed (Please don't connect the device with cable now; bridging setting is only used to provide the Internet
connection by WIFI) This device will restart WIFI and reconnect
4
2
