Amico GoLift Portable450, Инструкция по установке и эксплуатации

Страница: 10 / 28

10 Amico Mobility Solutions Corporation
Installing the GoLift Portable450 in the Amico PLP Track
3. By using an adjustable wrench, remove the endstop on
the PLP track by loosening the bolts.
4. Fasten the endstops back on to the PLP track. Ensure there is enough clearance room to place the endcap on the
PLP arm and place the endcap back on the arm.
5. Fasten all endstops tightly using an adjustable wrench.
!
NOTE: If you are installing the Amico GoLift Portable450 in an existing track system you must ensure that the
max load of the track system is equal or higher than the max load of the Amico GoLift Portable450.
6. To disconnect the lift from the trolley, open up the hook in the carabiner to release.
Installing the Endstop on the Amico Track
Amico Track Endstop
Use a 3/16 Allen key to
secure the endstop to
the track.