Amico ARS, Руководство по установке

Страница: 9 / 12

www.amico.com 8
Cleaning
WARNING
: The cleaning chemicals and methods below are not meant for controlling any infections. It shall be
the responsibility of the hospital or the hospital’s infection control officer to sanitize the equipment.
WARNING
: Please do not spray any chemical directly onto the product. Apply onto a soft cloth and wipe clean
to prevent chemicals getting into the internal components of the product.
The mounting assembly may be cleaned with most mild, non-abrasive solutions commonly used in the hospital
environment (e.g. diluted bleach, ammonia, or alcohol solutions). The surface finish will be permanently damaged
by strong chemicals and solvents such as acetone and trichloroethylene. Steel wool or other abrasive material
should never be used. Damage caused by the use of unapproved substances or processes will not be warranted.
It is recommended that you test any cleaning solution on a small area of the product that is not visible to verify
compatibility. Never submerge the product and do not allow liquids to enter it. Wipe any cleaning agents off the
product immediately using a water-dampened cloth. Dry the product thoroughly after cleaning.
No Acetone
Acetone is a colorless,
mobile, flammable liquid
Acetone
(Figure 1)
No Trichloroethylene
Trichloroethylene is a chlorinated
hydrocarbon commonly used as
an industrial solvent.
Trichloroethylene
(Figure 2)
Section 5: Maintenance, Troubleshooting
and Product Classification