Amico AHM, Руководство по установке

Страница: 10 / 36

10 Amico Accessories Inc.
Section 2: Installation on Rail Systems
Mounting to the VRS (Vertical Rail System)and the Ohmeda Rail
1. Ensure the V-adapter (or the D-Adapter) is in the UNLOCKED position, and ensure the AHM arm is LOCKED in the
highest vertical position.
2. Angle the adapters into the groove of the channel. Then straighten once inserted
(Figures 4 and 5)
.
3. Tighten screw knobs with a 3/16" (4.76 mm) HEX key when adapter is at desired height. Once tightened, the screw
knob will protrude from the other side. Fasten the nut to the screw to secure the adapter. Check all nuts and screw
knob are tightened to ensure V-adapter is locked
(Figure 6)
.
V-adapter: Silver adapter
(Figure 1 and 2)
.
Dovetail adapter: Black adapter
(Figure 4 and 5)
.
Figure 2 Figure 3
Mounted on the VRS
Figure 1
AHM Arm
V-adapter
Screw Knob
Figure 4
AHM Arm
D-Adapter
Screw Knob
Figure 5