
- 31 -
Display
While adjusting the temperature, the display shows the set temperature.
The display will show the current temperature measured inside the appli-
ance after about 10 seconds.
Note: If the temperature sensor malfunctions, the display may show
“HH” or “LL” and you will hear a beep. Even if the temperature sensor
malfunctions, the appliance will continue to operate periodically in order
to maintain the correct temperature. Contact the manufacturer's service
department to repair the appliance as soon as possible.
Adjust temperature
•
You can set the temperature individually for each zone in the range
from 5-12°C (Upper zone) and 12-22°C (lower zone).
•
If active, disable the Child Lock, then touch to select zone (upper
or lower).
•
Touch or to set the desired temperature.
Note: When you connect the appliance to power for the first time, or
after it was not used for an extended period, it may take longer to reach
the set temperature.
Change the temperature unit
Touch and hold two sensors
for 5 seconds to switch between °C and
°F.
Note: Blinking of the temperature unit means the compressor is operat-
ing. This is normal device operation.
Содержание WCF2V60B38.1
