58
OPERATION
Stopping Timer
When the set time has elapsed an acoustic
signal is sounded, which can be muted by
touching any sensor field. If no sensor field
is touched, the acoustic signal will stop au-
tomatically after 2 minutes.
To stop the timer countdown before the set
time has elapsed:
• select a cooking zone by touching cooking
zone selection sensor field (
3
).
• then, during the next 10 seconds, touch
the Timer selection sensor field (
4
). „
0 -
”
will be shown on the Timer display (
4
) and
the appropriate Timer activation pilot light
(
5
) will light up to indicate activation of the
Timer function for the relevant cooking
zone.
• If no setting is selected within 10 seconds
or the cooking zone selection sensor field
(
3
) is touched, the timer will stop and the
Timer display (
4
) will go out.
Checking Timer countdown
To check progress of Timer countdown at any time, touch the cooking zone selection sensor
field (
3
).
Changing Timer setting
Programmed Timer setting can be changed at any time. To change the programmed Timer
setting, select a cooking zone by touching the cooking zone selection sensor field (
3
), and
then touch the Timer selection sensor field (
4
).
5
4
3
4
3
