35
Connecting the water inlet hose(for cold water)
Connection the cold water supply hose to a threaded 3/4(inch) connector and make
sure that it is fastened tightly in place. If the water hoses are new or have not been used for
an extended period of time, let the water run to make sure that the water is clear and free
of impurities. If this precaution is not taken, there is a risk that the water inlet can get
blocked and the appliance could be damaged.
Electrical connection
Make sure the socket is compatible with the plug of the appliance. The soc-
ket must have earthing wire, and can hold 250V/10A, otherwise damage or
accidence may occur. Other electric appliance with big power can not use
the same socket with the dishwasher.
5
Tension Adjustment of the Door Spring
After placed the panel on the dishwasher, please try open and close the door to test the
balance to check out whether the door can remain a same place. If not, please adjusting the
screw in the direction of clockwise or counter-clockwise to adjust the balance of the door.
Or it has been adjusted.
4