Amica KO 2011, Руководство по эксплуатации

Страница: 33 / 36

33
OPERATION, CLEANING AND MAINTENANCE
Appliance‘s parts
Before use:
l
Rinse the kettle and boil water in it several times using clean water in each boiling cycle and filling
the kettle to the maximum level. Water will boil in approximately 5 minutes, and the kettle will switch
off automatically.
Use:
l
Place the base on a solid and level surface. If the appliance switches off before the water boils, it
means descaling is required.
You can use standard descaling agents, provided that appropriate instructions are followed. Do not
fill the kettle up to the top mark to prevent spillage, if the descaling agent causes water foaming.
To thoroughly remove any deposits after descaling, boil clean water several times, then rinse the
kettle with clean water.
l
Pour the required amount of clean water into the kettle. When the appliance is being used (or im -
mediately after use), do not touch any part of the kettle except the handle and make sure the lid is
properly closed. The amount of water can be checked on the level indicator on the outside of the
kettle. Always pay attention to the minimum and maximum levels, make sure the lid is properly and
firmly closed.
l
Place the kettle on the base, so that the bottom part of the kettle fits closely to the base.
l
Connect the power plug to an electrical outlet.
l
Depending on the model move the on/off switch down (on) to start the heating process, the indicator
light lights up or use the button in the handle.
l
When the water boils, the on/off switch automatically returns to its original position and the indicator
light goes off. You can also switched off the kettle manually by moving the on/off switch up.
l
It is now safe to pour hot water into another vessel through the outlet pout.
l
The kettle is equipped with an automatic safety switch. To prevent damage in case of improper use
or if the appliance is switched on by accident without water or if the water evaporates - then auto -
matic safety switch automatically turns off the heating element.
l
In this case, immediately pull out the power plug from the wall outlet and refill the kettle only after
sufficient time for it to cool down, i.e. after approximately 15-20 minutes.
1. Body of the kettle
2. Water level indicator
3. Handle
4. Lid opening button
5. Lid
6. On/off switch
7. Base
8. Power Cord
1
2
3
4
5
6
7
8