![background image](http://html.mh-extra.com/html/amica/kmc-series/kmc-series_instruction-manual_2932488013.webp)
13
OPERATION
Control panel
Upon connecting the plate to the mains a short sound signal should be emitted, after which
you can operate the plate.
Do not put any objects on the area of the sensors (a fault can be trigged), always
keep them clean.
Switching on the cooking plate
Should you fail to activate any sensor
within 10 seconds, the plate will switch off
automatically.
If the children lock is active, the plate cannot
be switched on (see Unlocking the plate).
Switching on a hotplate
Should you fail to activate any sensor within 10 seconds, the hotplate will switch
off automatically.
If the plate is not in operation, all the hotplates are
switched off and the display is blank.
When you touch the main sensor
, the plate
switches on, and all the indicators show “
0
” for about
10 seconds. You can now set the required heating
power by touching sensors (
+
) or (
-
) (
see Setting up
the heating power
).
When the plate is switched on (at least one hotplate is on), then you can switch on also the
other hotplates by touching the corresponding sensor (+) or (-). You can now set the required
heating power by touching the sensor (+) and the sensor (-) (see
Setting up the heating
power).
Содержание KMC Series
