23
Warning: Use only rinse aid designed for domestic dishwashers. Wipe up spilled rinse aid
with a cloth as it will cause the formation of large amounts of foam, and thus will reduce
the dishwashing effectiveness.
If the water hardness is higher than the maximum values given in the table above, or if you use water
from a deep well, it is recommended to use filters and water treatment equipment.
NOTE: The factory settings are for the water hardness level 4.
Water hardness table
Water hard-
ness
German
degrees
[dH]
French
degrees
[dF]
British
degrees
[dE]
Water hardness level indicator
Special salt
consumption
[g/cycle]
1
0 ~ 5
0 ~ 9
0 ~ 6
H1 Rapid Light bright
0
2
6-11
10-20
7-14
H2 90 Min Light bright
9
3
12-17
21-30
15-21
H3 90 Min, Rapid Light bright
12
4
18-22
31-40
22-28
H4 Glass Light bright
20
5
23-34
41-60
29-42
H5 Glass, Rapid Light bright
30
6
35-55
61-98
43-69
H6 Glass, 90 Min Light bright
60
The use of detergents
Use a detergent for domestic dishwashers. On the
market you can find detergent intended for dish
-
washers in the form of powder, gel and tablets.
The detergent must be placed in the dispenser
before starting the dishwasher. Store detergent in
a cool and dry place, out of reach of children.
Do not overfill the detergent dispenser, otherwise
the detergent may not dissolve completely and
leave streaks on the dishes.
If you need more information on the detergent
used, please contact the manufacturer directly.
1. Switch on the appliance;
2. Press the Start/Pause button for more than 5
seconds to start the water softener set
model within 60 seconds after the appliance was
switched on;
3. Press the Start/Pause button to select the
proper set according to your local
environment, the sets will change in the following
sequence:
H1->H2->H3->H4->H5->H6;
4. Without any operation in five seconds, the
machine will exit from set mode, the
machine is into standby status.
