TURN ON THE APPLIANCE AND SELECT PROGRAMME
31
Turn on the appliance
1. Slide out the upper and lower the basket, place the dishes inside and slide baskets back in
the dishwasher. It is recommended to first load the lower basket and then the upper basket.
2. Pour detergent.
3. Insert the plug into the wall outlet. Power data can be found on the product sheet. Make
sure that the water supply is turned on and set to the maximum pressure.
4. Close the appliance door, press the on/off button to turn on the appliance.
5. Select the desired programme and its indicator will light up. Press Start/Pause, and the
dishwasher programme will resume.
1
2
Change programme
You can change the programme only if it runs for a short time.
Otherwise the detergent is already dissolved in water and the water could be pumped out.
In this case, refill the dispenser with detergent and start the washing program from the
beginning. To reset your dishwasher, please follow the instructions below:
1. Press the Start/Pause button to pause the dishwashing programme.
2. Press and hold Programme button for 3 seconds The programme will be cancelled.
3. Press the programme button to select the desired programme.
4. Press the Start / Pause button and the dishwasher will start after approximately 10
seconds.
3
Add dishes during the programme:
You can add extra dishes at any time before detergent is released. In this case, follow the
instructions below:
1. Open the door to stop the washing program.
2. You can open the door completely when spray arms come to a stop.
3. Add the dishes.
4. Close the door.
5. The dishwasher will start.
WARNING!
Be careful when opening the door during the dishwashing programme as hot
steam can be released and cause scalding.