19
TURN ON THE APPLIANCE AND SELECT PROGRAMME
Change programme
The cycle takes place at a time can be modified only if they last only for a short period of time. Other
-
wise, there may have been already released detergent and discharge waste water through the device.
In this case, you must top up the detergent dispenser.
1. Open the door, the device goes into standby mode.
2. Press the MENU button and using the “+” and “-” choose another program and confirm with “OK”.
3. Close the dishwasher door and after approx. 10 seconds, the dishwasher will start the job.
If you wash, the dishwasher door is open, the unit goes into pause mode. The device signals
the door open at 1 minute until a proper closing of the dishwasher door. After closing the door,
dishwasher will launch later in the program after approx. 10 seconds.
1
2
