18
TURN ON THE APPLIANCE AND SELECT PROGRAMME
Turn on the appliance
The dishwasher can be turned on only after inserting the dishes, give all the necessary chemicals
dispensers, check that the spray arms can rotate freely and the door is closed:
1. Open the door Press
2. Press the MENU button, using the „+” and „-” select the section of programs suitable program and
press the „OK” if it is necessary, select additional functions.
3. If necessary, you can select additional functions.
4. Close the dishwasher door and after approx. 10 seconds, the dishwasher will start the job.
5. During the operation of the dishwasher in the lower part of the right side there will be blue spotlight
(Blue Dot) falling on the floor. The light stays lit when the dishwasher is running.
If the dishwasher door while the device is opened the device enters a pause, and every minute
is sounding stops the operation (the LED stops blinking and the program will burn with steady
light). To return to operation close the door.
After completion of the wash
When the machine has finished, you hear a noise that lasts approx. 8 seconds and the bottom of the
right side will blink blue spotlight (Blue Dot) falling on the floor. The light will flash for 5 minutes or less
in the case of early intervention. Carefully open the dishwasher door, being careful because in the
dishwasher may be a large amount of hot steam, turn it off using the button (1) and tighten the water
supply valve to the appliance. Dishes after opening the door are hot and prone to damage, so carefully
slide the two baskets of dishes. Do not empty the unit of blood for about 15 minutes to speed the drying
process.
1
2
3
