21
l
The percolation process can be stopped at any moment by pressing the percolation function switch
(Fig. 1 item 2).
l
After percolation is complete, unscrew the flask from the percolation head by twisting it to the left,
while simultaneously holding the body of the appliance with the other hand, then clean the filter
under running water.
Important!
-
The chromeplated part of the filter holder, filter, and the head are hot during the appliance
operation,
do not touch them. Hold the filter holder by the handle.
Make sure that the filter holder is properly secured in the head, this will prevent the filter holder
become loose from vibrations.
Monitor the level of liquid in the waste tank to avoid spillage.
OPERATION
Frother function (Special cappuccino)
Frother nozzle is designed for easy milk heating and frothing, which you could use to prepare delicious
cappuccino. Because the temperature of the steam function is higher than that of the coffee, it is recom
mended that you prepare the coffee before making the milk froth.
NOTE!
Take special care to avoid scalding.
l
Tilt the steam nozzle so that the nozzle can easily be placed in the milk container.
l
Place the milk container under the nozzle in such a way that the nozzle is immersed in 5 cm of milk.
l
Press the steam switch (Fig. 2 item 2). The appliance will heat the water. The steam switch flashes,
is lights up when the appliance reaches the appropriate temperature.
l
Turn the selector knob (Fig. 1 item 1) to hot water/steam mode (Fig. 2 item 4) to release the steam.
Hot steam will emerge from the nozzle.
l
Continue frothing milk for approximately 1 minute while making circular movements so that the
frother nozzle comes in and out from the milk. When the right amount of froth has formed, turn the
steam stream knob back to coffee making mode (Fig. 2 item 6).
l
Switch the appliance off and unplug it. Appliances with hot parts should not be left unattended as
those elements may burn or scald, wait until the appliance cools.
Important!
Hot steam is released from the nozzle. Take all necessary precautions to avoid burns.
Important!
In order not to damage the appliance, after each 5 uses of the frother function,
activate the coffee percolation function for two or three minutes. This process is explained in
detail on the next page.
Prepare warm water
l
Fill the tank with water.
l
Plug the appliance into the mains.
l
Press the on/off switch (Fig. 2 item 1). The appliance will heat the water.
l
Place the empty tank under the steam nozzle.
l
Turn the selector knob (Fig. 1 item 1) to hot water/steam mode (Fig. 2 item 4).
l
Press the coffee making/hot water button (Fig. 2 item 1). Hot water will start to issue from the noz
zle.
l
To stop the hot water process, press the coffee making/hot water button (Fig. 2 item 1) again.
l
Switch the appliance off and unplug it. Appliances with hot parts should not be left unattended as
those elements may burn or scald, wait until the appliance cools.
Automatic switch-off
l
The appliance switches itself off automatically if it has not been used for 5 minutes.
l
To reactivate the appliance, press the on/off switch (Fig. 2 item 1).
Prepare cappuccino
l
Froth milk as described above, then wait approximately 1 minute until froth has reached an appro
priate density.
l
Put the cup with frothed milk under the head and prepare coffee as described in section “coffee
making”.
For a better visual effect, it is best to use a transparent Cup, then you will see layers of froth and
coffee.