22
XI. Dosing
According to the detergent manufacturer’s instructions
Not enough detergent
l
The washing turns grey
l
Lumps of grease form, scale builds up
Too much detergent
l
Strong foaming
l
Ineffective washing, detergent incompletely rinsed from fabrics
PRACTICAL TIPS ON WASHING
IX. Door Lock
The appliance is equipped with a lock which prevents the door from
being opened during wash cycle. Once a wash cycle is complete,
the door lock is automatically released. In order to open the door
during the wash program, press PAUSE button and wait about 2
minutes to unlock the door.
NOTE 1: If there is water in the drum or it is still hot you will
not be able to open the door.
NOTE 2: The door cannot be opened during some stages of
the wash programme.
X. Delicate
fabrics
Programme:
l
Select the appropriate wash programme (e.g. WOOL).
Load
Do not overload the appliance, max 1/3 of the drum,
see Load
VIII. Load
distribution control
The electronic control panel contains a balance control system.
Before spinning, this checks the distribution of clothes inside the
drum.
In the event that too great an imbalance is discovered, it makes
several attempts to rearrange the clothes inside the appliance.
Sometimes these attempts may be insufficient to properly rearrange
the clothes (in the case of towelling dressing gowns washed along
with other types of garments, or sheets which have wrapped up in
a ball with other items inside).
The system may then react in two ways:
l
accept the uneven distribution of garments, but reduce spinning
speed,
l
decide that the garments are distributed too unevenly and not
allow spinning.
In either case, after washing is finished open the appliance door,
remove the washing by hand, close the door and select the spin
setting again.