Amica Akman, Руководство по эксплуатации

Страница: 21 / 40

21
Clean the dust container in these steps:
l
As shown in fig. 1, hold the dust container and
the handle and press the release button.
l
As shown in figure 2, remove the dust container
from the appliance.
l
As shown in figure 3, put the dust container on
the dustbin, press the release button to open
the bottom of the dust container, and the dirt
and dust will fall into the dustbin.
l
As shown in figure 4, once cleaned, close the
dust container.
Accessories:
How to use accessories?
l
As shown in figure 5, a narrow brush can be
used in the corners and holes.
l
As shown in figure 6, open the other bristle side
of the narrow brush as indicated by the arrow to
clean the sofa, curtains and decorations.
l
As shown in figure 7, press the button on the
brush to release the floor cleaning bristles.
l
As shown in figure 8, press the button on the
brush to retract the carpet cleaning bristles.
Carry out cleaning and maintenance:
l
The filter should be cleaned twice a year. Clean
the filter when it is visibly soiled.
l
Install the filter properly before starting the
vacuum cleaner.
l
Do NOT wash the filter in a washing machine or
blow with compressed air.
l
Using a wet filter will reduce suction and damage
the appliance motor.
Clean the dust container (Fig. 3, item ...)
WARRANTY AND AFTER SALES SERVICE
Warranty
Warranty service as stated on the warranty card.
The manufacturer shall not be held liable for any damage caused by improper use of the product.
After­sales service
Should you experience any problems whatsoever when using any Amica product, please contact our
SERVICE CENTRE for efficient and professional assistance. We wish to guarantee all those who have
trusted the Amica brand full convenience when using our products.
The radio device type complies with Directive 2014/53/EU. The full text of the declara­
tion of conformity is available at the manufacturer's, importer's or authorized repre­
sentative's website.
CLEANING AND MAINTENANCE
Additional maintenance:
l
As shown in figure 9, press the exhaust stopper
to open the filter socket.
l
As shown in figure 10, remove the exhaust filter.
l
As shown in figure, 11, twist the HEPA filter cover
to separate it from the chamber lid.
l
As shown in figure 12, remove the HEPA filter
cover
l
As shown in figure 13, remove the hair and dirt.
l
As shown in figure 14, rinse the HEPA filter.
l
Rinse the HEPA filter cover and assembly, outlet
sponge and the dust container in clean water
without detergent and dry before use.
l
Attach the HEPA filter assembly to the chamber
lid and make sure that the three tabs fit into the
grooves of the dust bin.
l
Rotate the HEPA filter assembly in the direction
marked on the chamber lid.
l
Install the cover and dust container according
to the markings provided on the appliance.
l
As shown in figure 14, lightly tap the filter housing
with your hand.
l
Put the dust container in the appliance. First set
the dust container in the correct position and
then press down on the dust container handle.
If you hear a click, the elements are correctly
in place.