Instruction Manual |
9
Note: Use a 3A Fuse.
Assembly and electrical connection should be carried out by
specialised personnel.
When installing this product we recommend you seek the help of
another individual.
Electrical Information
Mains electrical voltage: 230 – 240Vac
Total rated power consumption:
114W
Troubleshooting
Please note:
Your extractor is equipped with a motor protection device that will
switch off the motor to prevent damage from overheating. This
may happen during cooking when most or all of the zones/burners
are being used simultaneously, or if your extractor is installed
incorrectly, lower than the recommended height.
This is normal, and the extractor will work again once the motor has
cooled sufficiently.
If your extractor is not working:
1. Check that the mains supply has not been switched off.
2. Check that the fuse in the spur has not blown.
Contact CDA Customer Care
A
: Customer Care Department, The CDA Group Ltd, Harby Road,
Langar, Nottinghamshire, NG13 9HY
T
: 01949 862 012
F
: 01949 862 003
E
W
: www.cda.eu
