53
Position
burner “
switched off”
Position
“
large flame”
Position
“economical
flame”
Push-button
ignition*
l
press the spark ignition push-button
marked with ....,
l
press in the knob to the end and turn it
left to the “large flame” position
l
hold down until gas has lit,
l
set the required flame size (e.g. “economi
-
cal” ),
l
switch off the burner after finishing cook
-
ing, turning the knob right (to the off
position
l
).
OPERATION
How to use surface burners
Choice of cookware
Mind that the diameter of a pan base is always
larger than the burner flame crown, and that
the pan itself is covered. The recommended
pan diameter is around 2.5 to 3 times larger
than the burner diameter, that is, for:
l
an auxiliary burner – a pan with a diameter
of 90 to 150 mm,
l
a medium burner – a pan with a diameter
of 160 to 220 mm,
l
a large burner – a pan with a diameter of
200 to 240 mm, and the pan height should
not be greater than its diameter.
Ignition without an ignitor*
l
light a match,
l
press in the knob to the end and turn it
left to the “large flame” position
l
ignite gas with a match,
l
set required flame size (e.g. “economical”
),
l
switch off the burner after finishing
cooking, turning the knob right (to the off
position
l
).
Gas burner control knobs
Knob ignition*
l
press in the knob to the end and turn it left
to the “large flame” position
,
l
hold until gas is lit,
l
after the flame is lighted release the pres
-
sure on the knob and set a required flame
size.
WRONG
RIGHT
*optional