23
OPERATION
Booster function „P”
For 220 mm cooking zone, operation
of the Booster function is limited to 5
minutes. Once the Booster function
is automatically deactivated, the
cooking zone continues to operate at
its nominal power. The Booster func-
tion can be reactivated, provided the
appliance electronic circuits and
induction coils are not overheated.
When the pot is lifted from the cook-
ing zone when the Booster function
is in operation, it remains active and
the countdown continues.
Selecting the cooking zone heat setting
When the cooking zone display (3) shows „0” and a decimal point, start setting the desired
heat setting by sliding your finger across the heat selection sensor field (2).
If none of the sensor fields is touched within 20 seconds of switching on the
appliance, the cooking zone switches off.
When the appliance electronic circuits or
induction coils overheat when the Booster
function is in operation, it is automatically
deactivated. The cooking zone continues
to operate at its nominal power.
A cooking zone is active when its display shows a digit or a letter and a decimal point.
This indicates the cooking zone is ready for the heat setting to be set or changed.
The Booster Function increases the nominal
power of the 220 mm cooking zone from
2300W to 3000W and the 180 mm cooking
zone from 1200W to 1400W
When a cooking zone is active (3), activate
the booster function by touching the „P” sen-
sor field (6). Activation of the booster function
will be indicated by the letter „P” shown on the
relevant cooking zone display (3).
To switch off the Booster function, touch the
heat setting selection sensor field (2) and
reduce the heat setting, or lift the pot from
the cooking zone.
6
2
3
Содержание 6017DIE3.20HTaKDpJQSm
Страница 47: ...47 ...
Страница 48: ...Service Help Line For the UK please call 0844 815 8880 0818 46 46 46 For Ireland please call ...