Amica 1133.4TdYDpHbOX, Инструкция по эксплуатации

Страница: 14 / 36

14
OPERATION
4.Setting cook time and end time (delay
mode)
When the symbol (Cook Time) is shown,
press the
MENU
button repeatedly until the
symbol (End Time) flashes. Current time
is displayed. Set End Time using the control
knob.
3.Setting cook time
Press the
MENU
button until symbol (Cook
Time) is flashing (it is only possible when the
function selector knob is set to a position
other than “0”).
“00:00” will be displayed instead of current
time. Set cooking time using the control knob
. Time will be set if setting is not changed
within 5 seconds and the menu button is not
pressed
MENU
.
Cook time countdown begins and symbol
is on.
An acoustic signal is sounded after the set
time has elapsed (4 beeps - a pause - 4
beeps).
The sequence of acoustic signals is repeated
for approximately one minute in three second
intervals. “00:00” is displayed and the
symbol (cook time) is flashing.
To deactivate the alarm press any button
or turn oven function selector knob to “0”
or operate the control knob. Once alarm is
deactivated, current time and the selected
function are displayed, the symbol (cook
time) is off.
End Time will be set if setting is not changed
within 5 seconds and the menu button
MENU
is not pressed. End Time symbol is dis-
played.
When then delay time has elapsed, the
electronic programmer switches to mode
(Cook Time). Cook Time countdown begins,
symbol (End Time) is off and symbol
(Cook Time) is on.
An acoustic signal is sounded after the set
time has elapsed (4 beeps - a pause - 4
beeps). The sequence of acoustic signals
is repeated for approximately one minute in
three second intervals. “00:00” is displayed
and the symbol (cook time) is flashing.
To deactivate the alarm press any button
or turn oven function selector knob to “0”
or operate the control knob. Once alarm is
deactivated, current time and the selected
function are displayed, the symbol (cook
time) is off.
In order to erase Cook Time, End Time or
Kitchen Timer settings, press and hold
MENU
CLEAN
buttons for approximately 3
seconds and all settings will be erased.
Erasing the settings is only possible
when one of the electronic programmer’s
settings (Cook Time, End Time, Kitchen
Timer) was previously set.