Amica 10143.3TpDVQaXSp, Инструкция по эксплуатации

Страница: 31 / 44

31
OPERATION
Starting a steam programme
Select the appropriate steam program using
the buttons.
The oven is equipped with special stainless
steel bowls:
- perforated for vegetables and fish
- solid for meat.
Place bowls on the appropriate level in ac-
cordance with the displayed message.
Close the oven door.
Container drawer is located in the control
panel. Push and them pull the container
(figure below). Pour 0.6 l of water into the
container.
Press to confirm the setting and start the
programme.
Flashing time symbol indicates that you can
change the time as required or approve
the proposed default time. If no changes
are made within 3 minutes, the appliance
switches to standby mode.
Touch buttons to change time. Press
to confirm the selected time. Current time
is stored and Cook Time in box 2 automati-
cally changes to End Time. The programme
is started.
You can modify end time at any time, how-
ever, making any changes will modify the
preset program. To modify and store time
symbol stops flashing) or stop (end) the
process press . at any time. After this, the
appliance switches to standby mode.
Important! If you change the time setting
(operating time) the steam generator may
run out of water. Then the display will shows
a message “add water (0.6 l)”. After adding
the water, press the button.
Countdown will stop automatically - after
adding the water programme will be resumed
after a few seconds when water in the genera-
tor is detected.
Once the set cook time elapses, all functions
except cooling fan are turned off (see: Cool-
ing fan operation) and an acoustic signal is
sounded (4 beeps / pause / 4 beeps). The
sequence is repeated every 3 seconds for
about 5 minutes.
The display continues to show End Time and
the symbol is flashing.
Touch to acknowledge and mute the
acoustic signal. After this, the appliance
switches to standby mode. Touch to
acknowledge and mute the acoustic signal.
After this, the appliance switches to standby
mode.